TWIST be cool Instructions page 15

• Never leave your child unsupervised in the car seat – whether harnessed
GB
or not.
• Make sure you secure any luggage and loose items to reduce the risk of
injury in case of an accident.
• The manual must always be carried with the child safety seat.
• The use of any accessories or replacement parts is prohibited, and non-
compliance with result in the lapse of all warranty and liability claims.
• The child safety seat is to be used with original se at covers only.
• If the restraint system is used extensively it is normal for the seat covers
and other parts to suffer varying degrees of wear, depending on the dura-
tion and intensity of use, and they will then have to be replaced. We can
therefore not provided any blanket warranty beyond 6 months for wear
parts.
• Please contact your specialists shop for baby and children's products and
the relevant section of department stores, your car accessory specialist
shop or a catalogue company for re placement parts. They will have a
complete product portfolio for Be Cool child seat accessories to choose
from.
• The child seat TWIST Be Cool has been tested in crash simulations for im-
pacts of up to 50 km/h agai nst a solid obstacle. Test results are compliant
with the international test standard ECE R44.04, which is applicable for all
tested child safety seat systems. When used as intended and in compli-
ance with the installation and ope rating instructions, the child safety seat
should prevent or minimize injuries to children up to a body weight of 18kg
in case of an accident, depending on the type and severity of accident.
• A child safety device does not replace responsible and careful behavior in
road traffic.
15