Before First Use; Setting Up The Appliance; Heating The Appliance While Empty - Medion 16752 Mode D'emploi

14) Set clock time
15) Set microwave mode

8. Before first use

8.1. Setting up the appliance

Ensure that all packaging materials have been removed from inside the appliance
and the interior of the door.
ATTENTION!
The side cover (11) in the interior of the oven is not
part of the packaging and should not be removed!
WARNING!
Check the microwave for any damage – e.g. if the
door is crooked or bent, door seals and other seals
are damaged, hinges and the closing mechanism
are defective or loose, or if the interior of the appli-
ance or the door are dented or damaged. If you dis-
cover any damage, do not use the microwave. In this
case, please contact the Medion Service Centre.
• Do not place the microwave near to any heat sources, in a location prone to wet-
ness or high humidity, or in the immediate vicinity of flammable materials.
• The feet and the spacer on the rear of the appliance must not be removed as this
may impair the cooling of the appliance.
ATTENTION!
The microwave has been designed for household
use and may not be used outside!
• Connect the microwave to a convenient and easily accessible 230 V~50 Hz
earthed power socket.

8.2. Heating the appliance while empty

Before using the microwave, you must first heat it up whilst empty in order to re-
move any manufacturing residues. Turn on the appliance without any food and
without accessories as described below in grill mode:
` Open the door and remove any remaining packaging or accessories from the
oven.
Close the door.
` Press the
172 of 190
button until G is shown on the display.