Beurer HA 55 Pair Mode D'emploi page 35

2. Connect the charger to a USB adapter to use it via a socket, or
plug the charger directly into a USB port without a USB adapter.
3. The red charging LED lights up during the charging process. When
charging is complete, the charging LED lights up green; a full
charge usually takes about seven hours.
4. When charging is complete, disconnect the charger from the mains
and remove the hearing amplifier(s) from the charger.
Inserting the drying capsule
A drying capsule is included in delivery. Wearing
the hearing amplifiers behind your ear means they
come into contact with your skin, and therefore also
with sweat, for example. As a result, you should dry
the devices after each application to care for them
properly.
Remove the drying capsule from the packaging and place it in the
storage box with the bottom side up.
The capsule has a colour indicator. As the drying capacity decreases
over time, the colour changes from bright orange to white. If the capsule
is a whitish colour, it no longer has any drying capacity and has to be
exchanged
35