Beurer HA 55 Pair Mode D'emploi page 34

Using the hearing amplifiers
1. Turn the volume control to the lowest setting.
2. Place the device on your ear and insert the earplug into the ear canal
until it fits snugly. Do not force it into your ear.
3. Slide the power switch to the "N" (On) position and turn the volume
control to a suitable volume setting.
Charging:
1. Make sure that the device is switched off and
then insert it into one of the charger slots so
that it clicks into place.
Note: Please ensure that you insert the device
correctly into the charger so that it can be
charged correctly. The charger is equipped
with charging slots that enable you to insert the
device in the correct position. Allow the device
to click into place in one of these charging
slots (Fig. 1) so that the power switch sits in the
opening (Fig. 2).
You can charge one or both hearing amplifiers at
the same time.
34
Fig. 1
Fig. 2