Registering Your Machine's Fax Number - Canon imageRUNNER iR3045 Guide D'utilisateur

● If you are setting Daylight Saving Time:
❑
Press [On] ➞ [Start Date].
❑
Select the month and day from the Month and Day drop-down lists, respectively.
❑
Press [ ] or [+] to enter the time of day you want Daylight Saving Time to take effect ➞ press [OK].
❑
Press [End Date] ➞ make the settings in the same way as [Start Date] ➞ press [OK].
NOTE
If you set Daylight Saving Time, the machine automatically sets the standard time of the machine one
hour forward at the specified date and time.
3
Press [OK].

Registering Your Machine's Fax Number

You must store the machine's fax number. This number is printed on the document that you fax
to the receiving party.
The number may also be displayed on the touch panel display of the receiving party's machine,
depending on their type of machine.
NOTE
For this setting, the optional Super G3 FAX Board is required.
1
➞ [Communications Settings] ➞ [User Settings] under <Fax
Press
Settings> ➞ [Unit Telephone #].
2
Enter the unit's telephone number
using -
press [OK].
Details of each item are shown below.
[Space]: Press to insert a space between the area
code and the local fax number.
[+]: Use to insert a country code. Press [+] after
the country code, and before the fax
number.
[ ] [ ]: Press to move the position of the cursor.
[Backspace]: Press to delete the last number entered.
(numeric keys) ➞
Things You Must Do Before Using This Machine
1
1-27