Description Of Controls Vers. C - Nordcap RRS040C Manuel D'installation Et Emploi

DESCRIPTION OF CONTROLS vers. C

Vers. C
WITH ELECTRO-MECHANICAL
DESCRIPTION OF CONTROLS
A. ON/OFF switch.
B. Regenerating time regulation knob, with warning light indicating
operation
C. Temperature regulation knob, with warning light to show that
temperature has been reached.
C
OPERATING METHODS
Regenerating
D. Press the ON/OFF switch A; pre-heat by turning knob C to 140°C
and knob B (recommended time 10/15').
E. The appliance is now ready to carry out a regenerating cycle
B
F. Use knob B to set the required time. (A buzzer will warn the
operator at the end of every cycle)
RECOMMENDATIONS DURING OPERATION
G. The appliance should always be pre-heated before introducing
the product
H. Open the door during operation as little as possible
A
12
CONTROL
GB
Ed. 0314