Cleaning Instructions; Indoor Unit; Outdoor Unit; Front Panel - Panasonic CS-Z20TKEW Mode D'emploi

Cleaning instructions

To ensure optimal performance of the unit,
cleaning has to be carried out at regular intervals.
Dirty unit may cause malfunction and you may
see error code "H 99". Please consult authorised
dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fi n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.

Indoor unit

Wipe the unit gently with a soft,
dry cloth.
Human activity sensor
Do not hit or violently press or poke it with a
sharp object. This can lead to damage and
malfunction.

Outdoor unit

Make sure the air outlet of the
outdoor unit is not blocked by
fallen leaves or snow.
Clear any blockage from the
drain pipe.

Front panel

Wash gently and dry.
Remove the front panel
2 Pull out and lift up.
1 Release the hooks at
both ends.
12
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade,
away from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter
Close it securely
3 Close down.
4 Press both ends and center of the front panel.
Indoor unit
Aluminium fi n
Front panel
Air fi lters
Human activity
sensor
Attach air fi lter
Insert into the unit
2 Push in.
1 Insert at
both sides.