Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
7. Then guide the exhaust air hose
(extraction mode ) and the connect-
ing cable down from the ceiling .
The exhaust air hose should be approxi-
mately 10cm longer than the uper tower.
16
8. Slip the upper tower over the exhaust
air hose + electrical connecting cable.
Then fasten the upper tower to the ceil-
ing using washers and nuts, or using a
quick assembly flange. (Special tool
type
TZ
1000,
n
o
.55999800).
9.
Slip the lower tower over the
upper tower and fix using adhe-
sive tape.
10.
Fasten the (extraction mode) ex-
haust air hose to the cooker hood, mak-
ing sure that the hose is not bent.
Make
the
electrical
(Extraction mode) When using an exter-
nal blower motor, connect the connect-
ing cable.
11. Determine measurement (X-Y), X =
distance between hob and ceiling, Y =
distance between hob and hood.
i
t
e
m
connection.
Publicité
Table des Matières
