Replacing The Led Light; Preparing For Vacation; Preparing To Move - GE GPE12 Serie Manuel D'utilisation Et Instructions D'installation

Care and Cleaning

Replacing the LED Light

Tabs
snap here

Preparing for Vacation

unplug the refrigerator. Clean the interior with a baking
soda solution of one tablespoon (15 ml) of baking soda
to one quart (1 liter) of water. Leave the doors open.

Preparing to Move

Remove food and unplug the refrigerator. Secure all
loose items such as shelves and drawers by taping them
securely in place to prevent damage.
8
Light
Lens
of the refrigerator section.
1. Remove the top shelf (if necessary).
3. Remove the light lens by using a flat head screwdriver
to push one of tabs down. The lens snaps in and out.
5. Gently pull the leads out and disconnect from the
control housing assembly.
back into the mounting slot.
7. Replace the light lens by snapping it into place.
8.
Appliances at 800.GE.CARES (800.492.2737) during
normal business hours.
Be sure the refrigerator stays in an upright position
during moving.
49-60749-2