Important; Declaration Of Conformity - Worx VERSACUT WX420 Notice Originale

PLUG REPLACEMENT(UK &
IRELAND ONLY)
If you need to replace the fitted plug then
followthe instructions below.

IMPORTaNT

the wires in the mains lead are colored in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colors of the wires in the mains lead
of thisappliance may not correspond with the
coloured markings identifying the terminals
in your plug,proceed as follows. the wire
which is coloured blue must be connected to
the terminal which is marked with N. the wire
which is coloured brown must be connected
to the terminal which is marked with L.
waRNING: Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved BS1363/A plug and
the correct rated fuse.
NoTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
16
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Mini circular saw
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
DECLARATION OF
CONFORMITY
We,
POSItEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description wORx Mini-Circular saw
type wx420 (4-designation of machinery,
representative of Saw))
Function Cutting various materials with a
rotating toothed blade
Complies with the following Directives,
2006/42/EC
2004/108/EC
2011/65/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60745-1
EN 60745-2-5
the person authorized to compile the
technical file,
Name Russell Nicholson
address Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds, LS10 9DS, UK
2013/08/15
Leo Yue
POSItEC Quality Manager
EN