Storage; Cleaning And Maintenance; Safety Information - CASO DESIGN SousVide Garer SV300 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

8. When you want to change the settings please press
settings as described above.
9. You can deactivate the device by pressing
to standby mode.
► Risk of scalding! Carefully remove the food.
► If the device should indicate "EE1" in the LED display after switching on even though
the water filled in is above the minimum level, please add some salt to the water and stir
well.

19 Storage

Store the unit in its upright position, out of the reach of children.
► Turn off the device after use. So you can avoid unnecessary energy consumption and
ensure your safety.
► Always unplug the appliance from its outlet immediately after using and before cleaning.

20 Cleaning and Maintenance

This chapter provides important information on properly cleaning and maintaining your
SV300.
Warning
Note: EE1
PLEASE NOTE
20.1

Safety information

Please observe the following safety notices, before cleaning the
unit to avoid damage to the unit or personal injury:
► To ensure optimum performance, the unit must be cleaned
regularly. Failure to clean the unit regularly can lead to potential
malfunctions, as well as safety and health risks.
► Turn off and unplug the unit prior to cleaning.
► Clean the unit after every use as soon as it has cooled. Leaving
the unit uncleaned for long periods can make it very difficult to
remove leftover food and grime and may even damage the unit.
► If moisture penetrates the unit's housing, it can damage the
electronic components. Please ensure that no moisture enters the
device (control element).
► Do not use any harsh or abrasive cleaning agents.
for 3 seconds. The device will switch
Attention
for 3 seconds and change
39

Publicité

Table des Matières
loading

Table des Matières