Device Support, Software Updates And Maintenance; Operation Buttons; Front Panel - XZENT X-127 Manuel De L'utilisateur

DEVICE SUPPORT, SOFTWARE UPDATES AND
MAINTENANCE
Software updates and improvements are provided via USB updates which can be downloaded from
our website www.xzent.com Also customer care, FAQs and other helpful information can be found
there.
ATTENTION: this device has specifi c USB ports with special functions (USB-1, gray) and (USB-2,
black). The extension cables are distinguishable thru text-label to ensure proper identifi cation.
Software updates provided via XZENT MUST be installed on "USB-1" (USE FOR SW UPDATE). If the
installation has been done by 3rd party without proper marking/identifi cation of the extension wire – do
try the other port in case of update-failure.
USB1 (gray): For Smartphone Connectivity:
• Apple Car Play,
• Google Android Auto,
• Software Updates
USB2 (black): For charging phones or UBS media playback.
4
A 3
2

Operation buttons:

1. VOL/POWER: Press and hold for standby mode (Screen OFF, Audio OFF).
If powered on, press to mute.
If powered off, press to power on.
Rotate clockwise to increase audio volume.
Rotate anti-clockwise to decrease volume.
2. Home Press to return to home screen.
Press in home screen to go to last source (if available).
3. VOICE: Press to start voice recognition (in use with CarPlay or Google
Android Auto)
4. CAM: Press to show default camera, press again to close the camera view.
5. FAV: Press to execute assigned FAV shortpress function from device
settings (see chapter device settings).
Press and hold to execute assigned FAV longpress function from
device settings (see chapter device settings).
A. MIC internal microphone for handsfree functions.
B. RESET Press to perform a power reset.

FRONT PANEL

1 4 5 B
5