Change Of Chimney Connection - RAIS Q-Tee II USA Manuel D'utilisation

US English

Change of chimney connection

The stove is delivered ready for top outlet, but may be changed to back outlet in the
following way:
Sample photos
I
f thIs stove Is not Installed
,
properly a home fIre may re
. t
sult o reduce thIs rIsk
follow the dIrectIons for Instal
latIon carefully
Strike out the knock out plate at the rear of stove.
Remove the baffle plate and smoke chikane.
Remove the blanking plate (3 M6 nuts) and its sealing.
Mount the blanking plate on upper flue outlet hole - be
sure to place the sealing correctly.
It is all screwed together with the 3 M6 nuts.
Mount the flue collar on back flue outlet hole using three
M6x20 cylinder screws and M6 nuts.
Mount the baffle plate and smoke chikane in reverse
order.
-
,
please
.
User Manual Q-Tee II USA / Q-Tee II C USA
-
9