Change Of Chimney Connection - RAIS Q-Tee II INSERT USA Manuel D'utilisation

Change of chimney connection

The stove is delivered ready for top outlet, but may be changed to back outlet in the
following way:
Sample photos
I
f thIs stove Is not Installed properly
a home fIre may result
,
thIs rIsk please follow the dIrectIons
for InstallatIon carefully
16
Strike out the knock out plate at the rear of stove.
Remove the baffle plate and smoke chikane.
Remove the blanking plate (3 M6 nuts) and its sealing.
Mount the blanking plate on upper flue outlet hole - be
sure to place the sealing correctly.
It is all screwed together with the 3 M6 nuts.
Mount the flue collar on back flue outlet hole using three
M6x20 cylinder screws and M6 nuts.
Mount the baffle plate and smoke chikane in reverse
order.
,
. t
o reduce
.