RAIS Q-Tee II USA Manuel D'utilisation page 15

US English
Q-Tee II USA
Clearance to combustible walls
To find out whether the wall by which the stove is to be placed is combustible or not,
please contact your architect or the local building authorities.
If the floor is combustible, the stove must be placed on a non-combustible plate such
as steel, glass or stone. See pages 9 and 16 for additional information concerning floor
protection.
It may be possible to reduce clearances to combustible walls using the methods
Manufactured by:
detailed in NFPA 211. Seek guidance and permission in your locality as permits or
inspections may be required.
RAIS A/S
Clearances may only be reduced by means approved by regulatory authority
Minimum Rear vent Clearance
Industrivej 20, DK-9900 Frederikshavn, Denmark
(*
838040590 High socket complete
Model: Q-Tee II USA
A: Side Wall to Unit
Solid Fuel Room Heater
B: Back Wall to Unit
C: Corner Wall to Unit
D: Ceiling Height
Model
E: Front Wall / Furnishing 36"/915mm
Modéle
F: Back Wall to Pipe
G: Side Wall to Pipe
H Corner Wall to Pipe
ces to combustible surfaces
Clearances to combustible surfaces
Back wall
Back wall
G
G
A
A
RAIS A/S
Industrivej 20, DK-9900 Frederikshavn, Denmark
)
With Pedestal With Pedestal* No Pedestal
14"/356mm
12"/ 305mm
11"/280mm
Date of manufacture
Date of manufacture
45"/1143mm
Date of fabrication
Date of fabrication
15"/381mm
22,5"/572mm 22,5"/572mm 23,5"/597mm
20"/508mm
User Manual Q-Tee II USA / Q-Tee II C USA
Rear vent
14"/356mm
For Use With Solid Wood Fuel O
12"/305mm
N/A
Month
45"/1143mm
36"/915mm
Mois
N/A
N/A
Adjacent wall
Adjacent wall
C
C
H
15"/381mm
For Use With Solid Wo
15"/381mm
13"/331mm
Month
45"/1143mm
36"/915mm
Mois
18"/458mm
22"/559mm
H
Tes
UL
ULC
15