Battery Replacement; Fuse Replacement - Klein Tools MM400 Manuel D'instructions

ENGLISH

BATTERY REPLACEMENT

When indicator is displayed on LCD, batteries must be replaced.
1. Remove screw from battery door.
2. Replace 2 x AAA batteries (note proper polarity).
3. Replace battery door and fasten securely with screw.

FUSE REPLACEMENT

A fuse may blow if more than 500mA is applied to the V jack
or more than 10A is applied to the 10A jack
1. Remove 6 screws from back of meter and remove back housing.
2. Replace blown fuse(s) with:
V ( A/mA) jack
10A jack
3. Replace back housing and fasten securely with screws.
500mA/600V
fast-blow fuse
(Klein Cat. No. 69033)
16
MAINTENANCE
: 500mA/600V fast-blow (Klein Cat. No. 69033)
5
: 10A/600V fast-blow (Klein Cat. No. 69032)
3
of electric shock,
disconnect leads from
any voltage source
before removing
battery door.
electric shock, do
not operate meter
while battery door
is removed.
. To access fuses:
3
To avoid risk of electric shock,
disconnect leads from any voltage
source before accessing fuses.
To avoid risk of electric shock,
do not operate meter while back
housing is removed.
(Klein Cat. No. 69032)
To avoid risk
To avoid risk of
5
10A/600V
fast-blow fuse
,