Etherma ET-72 Manuel page 55

Night is shown. Repeat the steps
above to set time and temperature.
If one of the days of the week requires
different settings, do as follows:
Press and navigate to SET. Select with
. Navigate to 4E, select with . Now
you will see
MD TU WE TH FR SA SU
to the day with the different require-
ments. Confirm with .
Programme the day's four events as per
the instructions for personal settings. If
there are additional days with different
requirements, repeat the steps set out
above.
Important During the time that the program
is active it is still possible to change the de-
sired temperature (set point). When the next
programmed event starts, the thermostat re-
verts to the programmed temperature.
Frost protection program
This program is ideal for when you
want to protect against frost damage
in premises which are standing empty
or unused for long periods, such as hol-
iday homes and warehouses, or when
you will be away from your main home
for longer than usual. You set a desired
value (set point) and the thermostat
. Navigate
53 53