Etherma ET-72 Manuel page 49

Light and contrast
Set the light intensity of the LED
Press and navigate to SET. Select with
. Navigate to LED and select with .
Navigate between LED L (weak light)
and LED H (strong light). Confirm with
.
Set display contrast
Press and navigate to CONT. Press
to select. The display shows a number
between 1 and 8 depending on the
current setting. Navigate to regulate
the contrast. Confirm with when you
have achieved the correct level.
Time and date
Set time and date
Press and navigate to SET. Select with
. Navigate to CLK and select with .
First set the hours by navigating to the
correct time and confirm with .
Set the minutes in the same way and
confirm with .
Set the day, month and year in the
same way. Confirm with . The correct
day of the week is set automatically.
47 47