Etherma ET-72 Manuel page 51

Control functions
These are described in more detail in
the section How your thermostat works/
Control functions.
Select control function
Press and navigate to SET. Select with
. Navigate to RNF and select with .
The icon for the current function (R, F
or R&F) flashes. Navigate between the
different options and confirm with .
Important R cannot be selected if the floor
sensor is connected.
Change cut-out temperature for room
and floor thermostat (R&F)
Press and navigate to SET. Select with
. Navigate to OH and select with .
The set temperature now flashes on
the display. Navigate to the desired
temperature and confirm with .
49 49