Etherma ET-72 Manuel page 46

Room and floor thermostat – The
built-in sensors regulate the room
temperature and the sensor in the floor
functions as a floor temperature limiter.
The limitation can be set to between
5°C and 45°C. The factory setting of
35°C gives a surface temperature of
approx. 27°C. The cut-out temperature
can be changed, see the section How to
set the thermostat/Temperature.
Important
In rooms with large windows that are
exposed to solar insolation, we recommend
the function Room and floor thermostat.
In rooms with wooden flooring, the function
Room and floor thermostat must always be
used.
44 44