Etherma ET-72 Manuel page 54

You can set four events for every day:
wakeup
When programming you specify the
desired time and temperature for every
event.
Preset means that the program runs
every day, but you can also programme
each day individually.
Press and navigate to SET. Select with
. Navigate to 4E, select with . Now
you will see
Wakeup
current time and temperature.
The time flashes. Navigate until you
reach the time you want the wakeup
event to occur. Set hours first and
confirm with , then repeat for minutes
and confirm with .
Navigate to the desired temperature
for wakeup. Confirm with .
Out is shown. Repeat the steps
above to set time and temperature.
Home is shown. Repeat the steps
above to set time and temperature.
52 52
out home
MD TU WE TH FR SA SU
is shown together with the
and night .
. Press .