Etherma ET-72 Manuel page 41

enter personal settings is described in
the section How to set the thermostat.
There is an explanation of the symbols
on the display in the section Symbols.
Using the buttons
The buttons are used to raise and lower
the temperature as well as navigating
the menus.
You access the menus by pressing the
select button [ ]. Use the arrows to
navigate to a menu option and then
confirm with to select it. The menu
system is a scrolling system, in other
words you come to all submenus re-
gardless of the direction you start from.
If you want to exit a menu, navigate
until the display shows END. Then press
the select button . You can also wait
for 30 secs and the menu will end auto-
matically. How to navigate the menus
is described in the section How to set
the thermostat.
Turning the thermostat off and on
To enter standby mode, keep the select
button [ ] depressed for 4 seconds.
Return to normal mode by depressing
for another 4 seconds.
39 39