Oil/Filter Change - Graco LineLazer IV 130 HS Manuel De L'opérateur

Oil/Filter Change

Removal
1. F . 6 Place drip pan or rags under sprayer to catch
IG
hydraulic oil that drains out.
2. Remove drain plug (195). Allow hydraulic oil to
drain.
3. Unscrew filter (199) slowly - oil runs into groove and
drains out rear.
Installation
1. Install drain plug (195). Apply a light coat of oil to oil
filter gasket and install oil filter (199). Tighten oil fil-
ter 3/4 turn after gasket contacts base.
2. Fill with 1.25 gallons (4.73 liters) of Graco hydraulic
oil 169236 (5 gallon/20 liter) or 207428 (1 gallon/3.8
liter)
3. Check oil level.
4. Check oil level.
313776D
199
F . 6
IG
Oil/Filter Change
ti2271a
17