System Requirements - i-tec USB 3.0 SATA HDD Mode D'emploi

SYSTEM REQUIREMENTS

Hardware requirements: PC or a notebook with Intel Pentium 2 and higher CPU,
Mac PC / notebook with Apple G3 and higher CPU with a free USB 3.0 port. For
connecting you can also use a USB 2.0 port; however, the transfer speed will be
lower.
Operating system: Windows Vista, 7 32/64bit, 8 32/64bit, 8.1 32/64bit, 10 32/64bit,
Mac OS 10.4 and higher, Linux 2.6.24
CONTENTS
i-tec USB 3.0 SATA HDD Docking Station
ź
USB 3.0 cable (80 cm)
ź
Power adaptor (input: AC 100-230V, 50-60Hz, max. 1.2A; output: DC 12V / 3A)
ź
User manual
ź
HARDWARE INSTALATION
1) Insert the 2.5" / 3.5" SATA HDD along the edges of the docking station completely
to the bottom. Before that make sure that the SATA connectors and the SATA
ports face each other.
2) Make sure that the ON/OFF button is in the OFF position and then connect the
power adaptor.
3) Using a USB cable connect the docking station to the computer.
4) Now switch the button to the ON position. The red POWER light will go on.
FORMATTING A NEW HDD
If you use a hard disk which has been already formatted you can start using it
immediately. If you insert a brand new disk to the docking station, you need to
format it first (FAT32/NTFS). This can be done after the hardware installation of the
device. Use the disk manager in your OS (in Windows use the right mouse button to
click on "My Computer" icon, choose "Manage" and choose "Dick Management" in
the next step). Or you can use specialized software.
Quick Start
EN
04