Recommended Products - i-tec USB 3.0 SATA HDD Mode D'emploi

i-tec USB 3.0 SATA HDD Docking Station
Please carefully read the entire manual before starting work
with the docking station. More information can be found on
our website www.i-tec-europe.eu.

RECOMMENDED PRODUCTS

Connect a third external monitor in the
Windows system and a second external
monitor in the Mac system, e.g.
through i-tec USB 3.0 4K Ultra HD
Display Adapter - HDMI
(P/N: U3HDMI4K).
INTRODUCTION
i-tec USB 3.0 SATA HDD Docking Station is used for connecting up to two 2.5" or 3.5"
SATA I/II/III HDD without using a USB box. Thanks to the USB 3.0 connection and
SATA III data interface you can use high transfer speeds up to 5 Gbps.
SPECIFICATION
USB 3.0 interface, compatible with USB 2.0
ź
Maximum transfer speed: 5 Gbps via USB 3.0, 480 Mbps via USB 2.0; the actual
ź
speed depends on the HDD properties
Supported HDD: 2.5" / 3.5" HDD not exceeding the width of a standard 3.5"
ź
HDD with data interface SATA I/II/III up to 6TB
LED indication: for power and inserting of HDD, blue for 25% / 50% / 75% /
ź
100% of cloning and HDD activity
Plug & Play functions
ź
OS: Windows Vista, 7 32/64bit, 8 32/64bit, 8.1 32/64bit, 10 32/64bit, Mac OS
ź
10.4 and higher, Linux 2.6.24
Operating temperature: 5°C - 50°C
ź
Dimensions: 153 x 111 x 62mm
ź
Weight: 390 g
ź
EN EN
03 07
Expand your device with 4 standard
USB-A ports via USB-C interface. For
example, i-tec USB C Slim Passive HUB 4
Port (P/N: C31HUB404).