Conformity Declaration - Sagola PSAM 107 Manuel D'utilisation

19.

Conformity Declaration

In accordance with UNE-EN ISO/IEC 17050-1 (ISO/IEC 17050-1:2004)
Manufacturer: SAGOLA, S.A.
Address: Calle Urartea, 6 - 01010 VITORIA-GASTEIZ (Alava) SPAIN
Hereby declares that the product: PISTOLA AIRLESS Brand: SAGOLA
Product line: PSAM 107
BATCH: (See the back page of this Manual)
In accordance with the Esential Security Provisions on the Annex of the Directive Directiva 2006/42/CE.
The product conforms with the standards:
• Directive of machines (2006/42/CE) and the corresponding transposition into national law 1644/2008.
• EN 1953:2013. Atomising and spraying equipment for coating materials. Security requirements.
• UNE-EN 12100:2012. Safety of machinery. General principles for design. Risk assessment and risk reduction.
These also meets the following Regulations and Directives:
Non Electrical Equipments:
ATEX Directive (Directive 2014/34/CE) II 2G X
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking All static electricity is discharged through air pipes.
The air hoses must be "STATIC-FREE".
• UNE EN-13463-1:2011. Non electrical equipment used for potentially explosive atmospheres.
Full technical documentation and service instructions are available.
In Vitoria-Gasteiz on 01/11/2017 Signed
Technical Manager
Enrique Sánchez Uriondo
ENGLISH