Declaration Of Conformity - Eaton xComfort CHCA-00/01 Notice D'installation

Declaration of Conformity

We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility that the product (family)
Eaton - Smart Home Controller,
CHCA-00/01 (contains RF-Modul CSCZ-01/xx)
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and "good engineering practices"
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 55022:2010,
EN 55024:2010, EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 +
A2:2013, EN 50491-5-1:2010, EN 50491-5-2:2010, EN 62479:2010,
EN 50581:2012
EU- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark: 2013
Doc.Id.: CHCA-0001_171117
Fernando Ceccarelli
Senior Vice President
General Manager
9
17.11.2017
Friedrich Schröder
Director Quality
& Systems