Publicité
Les langues disponibles
Les langues disponibles
Connectors:
LED1
LAN
Functions:
LAN LED
OFF
ON
LED1
valid Link Data activity
LED2 100Mbit 10Mbit
SD
USB-A
USB-B
LAN
LED2
micro
USB
SD
A
Symbol
Symbol
Blink
MRF
>MRF2.19
Power
USB
Power
B
5VDC,
1A
LED
Function
Power
Green: Power ON, USE
Orange: Booting
Network
Red: No Internet
connection
Orange: Internet connection
Green: Remote Server Connection
RF Traffic
Green: RF traffic
System Message
Yellow: Message in the Mailbox
Battery
Green: All batteries OK
status
Yellow : At least one battery is weak
(assigned sensors) Red: One is very weak or empty
Button
Function
Recovery
No RF programming functionality!
1. Restore default admin password and network settings to
DHCP: Press button for 15 seconds (power LED flashes
green and will finally change to orange), system will reboot.
2. Complete Recovery, software & default settings being
copied from SD card. Please backup your settings as they
will be lost during recovery process. Disconnect the power
supply, insert the EATON microSD card, during
reconnecting the power supply - keep the button pressed
for ~ 3 sec till the power LED switches from orange to red.
The flashing red power LED indicates the update process.
Make sure the power supply is not disconnected and the
sd card is not removed. System will reboot when finished.
In case of a failed recovery process, all LEDs will flash red
and please contact your Eaton support contact person.
Icon
Function
Double Click on
Ident Smart Home Controller
Icon in MRF
4
Connectors
Functionality
LAN
Ethernet
Communication
micro SD
System Rescue
Boot Recovery
USB A
reserved
USB B
reserved
Power
Power supply
Green Blinking 30s (Ident)
Publicité
