Bosch Professional GLL 2 Notice Originale page 16

16 | English
A
– At a distance of 2.5 m from the measuring tool, mark the centre of the
laser line on both walls (point Ⅰ on wall A and point Ⅱ on wall B).
A
– Set up the measuring tool at a 5 m distance and rotated by 180° and al-
low it to level in.
– Align the height of the measuring tool (using the tripod or by placing ob-
jects underneath as required) so that the centre of the laser line exactly
hits the previously marked point Ⅱ on wall B.
1 609 92A 58R | (04.03.2020)
B
B
Bosch Power Tools