Connecting - Disconnecting The Patient Tubing; Modifying Parameters Via The Menu - SOPRO COMEG 640-45L Manuel D'utilisation

B. CONNECTING – DISCONNECTING THE PATIENT TUBING
The manufacturer can not be held responsible for any reaction or disfunction associated with the use of damaged or unsuitable tubing.
Do not use tubing if the packaging is damaged.
Sterile tubes are disposable; do not re-sterilize.
Use of a hydrophobic bacterial filter is essential for the prevention of cross-contamination with the patient. Replace it for each patient.
Open the first set of packaging film on the tubing. Hand the second set to sterile personnel.
Keep the patient's sterile tube in the operating theatre.
Open the second sterile pouch and connect the tubing to the insufflator's gas outlet.
Fit the other piece of tubing into the external desufflation actuator
The tube needs to be freely inserted without kinks, and must not be obstructed.
• Connect the Luer lock to the trocar port on the patient side.
C. MODIFYING PARAMETERS VIA THE MENU
User action
At the start of the procedure use the thumbwheel to select the
MENU and press it to enter in the MENU.
To modify a parameter, use the thumbwheel to select it [G].
Press the thumbwheel to select:
• a language from the following: English, French, German,
Italian and Spanish. The menu's default language is English.
• Automatic or manual low/high flow switching
• reset the volume of CO
• reset the chronometer to zero
• contrast control
• purge function
• CO2 supply (bottle or wall)
Turn the thumbwheel to change the values and press the
thumbwheel to validate.
To exit, select "return" and validate.
Automatic switching must be selected by order of the surgeon.
10
0 1 1 3 8 7 C • 1 0 / 2 0 1 1
E N G L I S H
used to zero.
2
7
Device response
The parameter is highlighted in the display