Global Transpose Function ("Glb"); Octave Settings; Other Keyboard Part Functions - Roland EXR-46 OR Manuel D'utilisation

Global transpose function ("GLB")

There is also a "master transpose control" that alters the pitch of
all sections of the EXR-46 OR. Its value is added to the current
transposition interval until you reset it to "0" or until you switch
off your EXR-46 OR.
(1) Press the [TRANSPOSE] button.
The display now shows the "USR Trnsp" message.
(2) Press the SELECT [®] button once to select the following
parameter:
GLBTrnsp
(3) Use the [–][+] and/or numeric buttons ([0]~[9]) to set the
desired transposition interval.
The setting range is –6~0~5 semitones. This setting is added
to (or subtracted from) the "USRTrnsp" value of all sections
and all User Programs.
Press [+] or [–] repeatedly to transpose the keyboard up or
down. You can also directly enter the desired interval by
pressing the corresponding numeric key.
To transpose the keyboard down, hold down [–] while press-
ing [0]~[6] (in that case, you can transpose the pitch down by
up to 6 semitones).
As soon a you select a value other than "0", the
starts flashing to signal that the EXR-46 OR is applying glo-
bal transposition to all sections.
(4) To switch the global transposition back off, repeat step
(3), this time entering the value "0" (no transposition).
The icon stops flashing (and disappears if the
TRANSPOSE
"USRTrnsp" function is off).
Note: This setting is not saved to a User Program and will be
cancelled when you switch off the EXR-46 OR.
(5) Press another "big" button in the DATA ENTRY section to
leave this function.

Octave settings

The EXR-46 OR allows you to transpose the Keyboard parts
(Main, Split, Dual) up or down by 4 octaves.
To change the octave transposition of a part, hold down [TONE]
(Main part), [SPLIT] (Split part) or [DUAL] (Dual part), while press-
ing [–] (down) or [+] (up).
icon
TRANSPOSE
NO YES

Other Keyboard part functions

Here are yet other functions related to the Keyboard parts.
These can be set via the FUNCTION menu, or are covered else-
where:
• Keyboard velocity (see p. 34)
• Master Tune (see p. 39)
• Volume of the Keyboard parts (see p. 41)
• Intelligence function for the Split part (see p. 40)
• Hold function for the Split part (see p. 40).
EXR-46 OR
33