Changing The Track Assignments - Roland EXR-46 OR Manuel D'utilisation

r EXR-46 OR
to play the right hand yourself while listening to the left-
hand part of the Standard MIDI File. The EXR-46 OR contains
an excellent stereo piano Tone you could use.
[LEFT]–Refers to track "3" of the selected Standard MIDI File.
Music data for educational purposes (especially piano music)
use this track for the left-hand part. See also above.
[OTHERS]–Mutes all tracks that cannot be muted with the
remaining LOCK buttons, more specifically: 1, 3, 6~9, 12~16.
[BASS]–Mutes track "2", which is assigned to the bass part of
a Standard MIDI File.
[DRUMS]–Mutes track "10", which is assigned to the drum
part of a Standard MIDI File.
Note: You also switch off several buttons simultaneously.
(4) Press [|√] and [®÷ª] to start playback.
(5) Press [®÷ª] again to stop playback.
(6) Press [MINUS¥ONE] again (or one of the "big" DATA ENTRY
buttons) to switch the function of the same name back
off again.
Note: The Minus One setting can be saved along with the
selected song. See page 49.
22

Changing the track assignments

If the song files you are using do not conform to the GM system
(and therefore do not correspond to the RIGHT, LEFT, BASS or
DRUM assignments of the Minus One function), you can pro-
ceed as follows to assign other tracks (MIDI channels) to the
LOCK [RIGHT], [LEFT], [BASS] and [DRUMS] buttons:
(1) Press the [MINUS¥ONE] button to activate the function of
the same name.
(2) Press and hold the [RIGHT], [LEFT], [BASS] or [DRUM] button.
(3) While holding that button, use the [–][+] buttons to assign
the desired MIDI channel to the button you are holding.
Example: To assign MIDI channel "10" to the [RIGHT] button,
press DATA ENTRY [+] until the display looks as follows:
RIGHT
(4) Press [MINUS¥ONE] again (or one of the "big" DATA ENTRY
buttons) to switch the function of the same name back
off again.
Note: The Minus One setting can be saved along with the
selected song. See page 49.