Maintenance Settings - Philips Saeco Xelsis RI9946/47 Mode D'emploi

maintenanCe SettinGS

MAINTENANCE SETTINGS
PRODUCT COUNTERS
DESCALING CYCLE
BREW UNIT CLEANING CYCLE
CARAFE WASH CYCLE
CARAFE AUTO CLEAN
FACTORY SETTINGS
This menu allows setting all the functions for correct machine maintenance
This function shows how many products have been brewed for every single
type of coffee since the last reset .
This function enables the descaling cycle (the machine shows how many
litres can be dispensed before descaling) (See page 39) .
This function enables the wash cycle for the brew group (See page 38).
This function enables the wash cycle for the carafe used for preparing milk
beverages (See page 42) .
Note: This wash cycle is fundamental for a correct maintenance of
the carafe.
This function enables automatic cleaning of the carafe after each dispensing
of milk-based products .
OFF
The self-cleaning function is disabled .
ON
The self-cleaning function is enabled .
This function allows you to restore all factory settings.
Note: By restoring the factory settings, all the personal parameters
are lost.
37