Philips Saeco Xelsis RI9946/47 Mode D'emploi page 33

This function allows you to activate and change the fi ngerprint for the user selection.
Note: Before starting the Fingerprint Enable procedure make sure that the sensor is clean (see the "Cleaning and
Maintenance" section). Wash your hands thoroughly and make sure they are properly hydrated and not greasy. Do not use
your thumb.
The machine will request you to put your fi nger on the sensor for three times in order to widen the fi ngerprint reading
1
3.3.1. USER EDIT
ESC
EDIT NAME USER1
FINGERPRINT ENABLE OFF
NAME ENABLE OFF
OK
Select the function and press the "OK"
button .
Warning: Sometimes the system may not recognize or may have diffi culties in recognizing the user's fi ngerprints, in
particular if these are not well-defi ned (dry skin or skin altered by natural causes) or damaged (e.g. by heavy manual
activities). This does not mean that the system does not work, but is due to its accuracy and precision, which do not
accept or process fi ngerprints without the minimum quality requirements.
Thanks to its precision, the system avoids improper fi ngerprint reading and prevents diff erent users' fi ngerprints
reading from superimposing each other.
4
17/05/09
3.3.1. EDIT USER
0%
PLEASE REMOVE FINGER
Remove your fi nger from the sensor
when requested. Wait....
FINGERPRINT ENABLE
area and improve the system reliability.
2
17/05/09
3.3.1. EDIT USER
0%
PLEASE PUT FINGER
The machine requests you to put your
fi nger on the sensor to perform the
fi rst reading.
5
3.3.1. EDIT USER 17/05/09
33%
PLEASE PUT FINGER
The machine requests you to put the
previously used fi nger on the sensor
to perform the second reading .
3
Put your fi nger fi rmly on the sensor.
6
17/05/09
3.3.1. EDIT USER
33%
PLEASE REMOVE FINGER
Remove your fi nger from the sensor
when requested. Wait....
25