Install The Upper Handle; Install The Grass Catcher; Install The Mulch Plug; Set The Blade Height - GreenWorks MO09B01 Manuel D'opérateur

7.3

INSTALL THE UPPER HANDLE

10
9
1. Align the holes in the upper handle and the lower handle.
2. Put the bolts (10) through the holes.
3. Tighten the knobs (9) onto the bolts.
4. Do the same operation on the other side.
7.4

INSTALL THE GRASS CATCHER

1. Remove the mulch plug.
2. Open the rear discharge door and hold it.
3. Hold the the grass catcher (7) by its handle and put the
hooks over the slots (12).
4. Close the rear discharge door.
English
7.5
11
1. Remove the grass catcher.
2. Open the rear discharge door (5) and hold it.
3. Hold the mulch plug (8) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
7.6
The machine can be set to different blade heights.
7
12
1. Pull the height adjustment lever (6) rearward to increase
the blade height.
2. Pull the height adjustment lever forward to decrease the
blade height.
8
Wear eye protection during operation.
9

INSTALL THE MULCH PLUG

5
8

SET THE BLADE HEIGHT

OPERATION

WARNING
EN
6