Install The Upper Handle; Install The Grass Catcher; Install The Mulch Plug; Set The Blade Height - GreenWorks POWERALL MO48L2211 LME472 Manuel De L'utilisateur

WARNING
Do not make damage to the cables when you fold or unfold
the handle.
8.3

INSTALL THE UPPER HANDLE

3
10
11
4
1. Align the holes in the upper handle (3) and the lower
handle (4).
2. Put the cam locks (10) through the holes.
3. Tighten the knobs (11) onto the cam locks.
4. There are two positions (P) available to choose while
installing the upper handle.
5. Do the same operation on the other side.
WARNING
Use caution when installing upper handle to avoid potential
finger pinches.
8.4

INSTALL THE GRASS CATCHER

1. Remove the mulch plug.
10
11
P
13
12
English
2. Open the rear discharge door (5) and hold it.
3. Hold the the grass catcher (7) by its handle (12) and put
the hooks (12) over the slots (13).
4. Close the rear discharge door.
8.5

INSTALL THE MULCH PLUG

1. Remove the grass catcher.
2. Open the rear discharge door (5) and hold it.
3. Hold the mulch plug (8) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
8.6

SET THE BLADE HEIGHT

The machine can be set to different blade heights.
7
1. Push the height adjustment button (17), lfit the height
adjustment bar (21) to a higher position to increase the
blade height.
2. Push the height adjustment button, press the height
adjustment bar to a lower position to decrease the blade
height.
9
5
8
21
17
EN