Features
Mixer Release Button
Use this feature to release the mixer
Bowl Rest
™
This feature can be used on most
the edge of the bowl.
Pinch Hazard�
w CAUTION
Bowl Rest when mixer is on.
NOTE: Do not use Bowl Rest on small
(1
⁄
quart [1.4 L]) mixing bowls or
1
2
plastic mixing bowls.
Using Your Mixer
1� Always make sure mixer is unplugged
and OFF ( ) before inserting beaters,
using as a hand mixer or assembling
on the stand.
2� Plug mixer into electrical outlet.
3� Move the speed control to desired
speed, starting at 1 and increasing to
a higher speed as necessary.
4� If using as a stand mixer do not
leave mixer unattended. Always
monitor the progress of the mixing.
5� When finished mixing, move the
speed control to OFF ( ) and unplug
mixer.
from the "locked"
position on the
stand.
large mixing
bowls. Use
the Bowl Rest
while adding
ingredients
or checking a
recipe. To use,
TURN MIXER
OFF ( ) and then
set the mixer on
Never use
QuickBurst
™
Press and hold down the button for
QuickBurst
™
Shift and Stir
Bowl Lever
™
Use the lever to move the turntable.
Bowl
Lever
6� To eject beaters, push straight down
7� To remove mixer from stand, hold
mixer and press mixer release
button. Pull mixer to release from
stand.
additional power
at any speed.
NOTE: Never use
QuickBurst
for more than
two minutes at
a time or motor
may overheat.
This allows you
to position the
beaters near the
edge of the bowl
or in the center
for better mixing
performance.
on the eject
button.
5