Kitchen Timer; Speedboost ® Function; Autochef - Bosch 800 Serie Manuel D'utilisation

Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the section on ~ "Basic settings"
Note: The cook time can be changed or canceled for
any element:
Select the desired element and touch the Timer key
twice. The remaining cook time for the element is
displayed. Adjust the cook time using the number keys,
or deactivate it by setting the the timer value to

Kitchen timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
Touch the Timer key until the
1.
and min appear on the timer display.
‹‹
Set the desired time using the number keys.
2.
The timer start to count down after a few seconds.
Changing or deleting the time
Touch the Timer key repeatedly until the
lights up.
Change the time using number keys, or set
to delete the programmed time.
When the time has elapsed
A beep sounds. appears on the timer display and the
‹‹
V indicator lights up. The displays go out after
10 seconds.
When the Timer key is touched, the displays go out and
the beep stops.
SpeedBoost function
®
The SpeedBoost function can be used to heat large
®
amounts of water faster than by using heat level
Limitation on use
This function can always be activated for an element,
provided the other element in the same group is not in
use (see illustration). Otherwise,
display for the selected element; heat setting
be set automatically without activating the function.
18
.
‹‹
V indicator lights up.
indicator
V
in order
‹‹
.
Š
and will flash in the
› Š
Š will then
Activation
Select an element.
1.
Touch the Speed Boost key.
2.
lights up on the display.
›
The function is activated.
Deactivation
Select the element on which SpeedBoost
1.
Touch the Speed Boost key.
2.
goes out on the display and the element switched
›
back to heat setting
Š
The function is deactivated.
Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.

AutoChef

®
When you are using AutoChef
element, a sensor controls the temperature of the pan.
Advantages when frying
The element only heats up if this is required to
▯
maintain the temperature. This saves energy and
prevents the oil or fat from overheating.
The AutoChef function beeps when the empty frying
®
▯
pan has reached the optimum temperature for adding
oil and then for adding the food.
CAUTION
9
Never leave oil or fat cooking unattended.
▯
Place the pan in the center of the element. Make
▯
sure that the base of the pan has the proper
diameter.
Do not cover the pan with a lid. The automatic
▯
regulation will not work. A mash splatter guard
can be used without affecting the automatic
regulation.
Only use fat or oil that is suitable for frying. When
▯
you are using butter, margarine, olive oil or pork
lard, select the min temperature setting.
AutoChef is not suitable for boiling.
®
▯
Suitable pans for AutoChef
Suitable frying pans for use with AutoChef
as optional accessories. Only use pans that are suitable
for use with AutoChef . You can buy our system pans in
®
specialized stores, or through our Customer Support.
Always indicate the related reference code.
HEZ390210 (Small)
▯
HEZ390220 (Medium)
▯
HEZ390230 (Large)
▯
The frying pans have a non-stick coating, which means
that very little oil is needed for frying.
is set.
®
.
to operate the heating
®
®
are available
®