Warning Messages; Transport And Installation - LEMI TESERA 1-3-4M Notice D'utilisation

WARNING! It is recommended not to remove the labels on the machine; labels must
be preserved well fixed, whole and easy to read.
WARNING! The data present on each label, must be reported in case of need of as-
sistance or spare parts.

1.4. Warning messages

The chair is provided with signs showing phrases or symbols; pay attention to the warnings on the equipment.
The symbol that warns against the risk of electrocution is located next to the plug of the electric supply.
The yellow label warning "DON'T PUT YOUR FOOT ON – DON'T PUT OBJECTS ON" is located next to moving parts: it
warns against putting any object or limb in the chair movement area in order to avoid crushing damages.
WARNING! It is recommended not to remove the labels on the machine; labels must
be preserved well fixed, whole and easy to read.
2.1. Handling and removal from the packaging
The chair can be raised and moved manually by two or four people, taking it exclusively from the 4 support feet.
The weight of the chair is equal to max 73 kg.
The chair is shipped packed in a carton box. Open the box so you can freely raise the chair; remove it from the
packaging, taking it from the base and pull it upwards.
WARNING! It is strictly forbidden to remove the chair by lifting it from the top (mattress).
WARNING! Do not use knives or box cutters to open the box so as not to risk damaging
the chair and in particular the mattress.
WARNING! The operation of moving of the chair must be done by well trained personnel.
WARNING! Before using the chair, it is recommended to clean the entire chair following
the procedure on §6.
2.2. Flooring
The floor on which the chair will be placed must be solid, smooth, horizontal and adequate to support its weight
and ensure the stability.
2.3. Lighting
The user must ensure that the lighting of the work areas is sufficient to allow a good view of the operations and all
elements of the chair; the level of lighting should be in accordance with the UNI EN 12464-1; in particular should
be avoided shadows and annoying glare.
2.4. Levelling
The chair is provided with 4 adjustable feet that enable to level it perfectly and to compensate any failing of the
flooring.

2. TRANSPORT AND INSTALLATION

5