LEMI TESERA 1-3-4M Notice D'utilisation page 12

7.5. Foot adjustment
To adjust / remove the foot, turn the foot knob
7.6. Separated legs adjustment (ONLY FOR TESERA 3M)
To adjust the legs separately from the backrest: support the final part
of the upholstery leg with your hand, adjust it at the correct position
and fix it by closing the LEGS HANDLE you can find on the side of
the legs.
ATTENTION: the legs handle must only turn clockwise/
anticlockwise. DO NOT PRESS THE BLUE BUTTON.
7.7. Back adjustment (ONLY for TESERA 1M)
Hold the back upholstery and use the back adjustment lever to place
it in the required position.
7.8. Tilting adjustment (ONLY for TESERA 1M)
Hold the legs upholstery and turn the tilting handle on OPEN.
Adjust the chair at the required position and block it by turning the
tilting handle on CLOSE.
ATTENTION: the tilting handle must only turn clockwise/
anticlockwise. DO NOT PRESS THE BLUE BUTTON.
7.9. Legs adjustment (ONLY for TESERA 1M)
To LOWER/LIFT: hold the legs upholstery and use the legs adjust-
ment lever to place them up or down.
8. USE OF THE TABLE
200 kg (max. patient weight)
One person only can get on the chair; the person must go up/down when the chair is in the basic position
going up on the seat.
WARNING! Get on the chair always by sitting properly in the central
part of the seat. Do not sit or lean on the side of the feet or of the
head.
WARNING! The limbs of the patient must always be on the chair.
The operator must always inform the patient when he moves the chair.
WARNING! Be careful to prevent the chair or its electrical parts from getting wet and that liquids
stagnate on the chair itself; immediately wipe up any liquids – including physiological liquids of
the patient – that can be poured on the chair.
12
Foot knob
Legs handle
2500 N (carico di sicurezza)