LEMI TESERA 1-3-4M Notice D'utilisation page 10

7. INSTRUCTION FOR USE
7.1. Operator
The chair is controlled by an operator through a pedal with cable, a wireless pedal or a handset control; the
operator must position themselves so as to have complete view of the controlled parts and of the patient.
WARNING! During the functioning of the chair the operator should always remain in the
vicinity of the controls; it is forbidden to leave the chair unattended during its operation.
Operators should pay attention to avoid creating potentially dangerous situations for their
own or other's safety.
Operators must only use controls (foot or hand) to move the chair.
All people working on the chair must be properly trained on the correct working procedures
and informed about its proper functioning. They also must be informed about all parts of
this documentation relevant to their job.
Operators must not wear clothes with drapes that could get caught by moving part of the
chair. Proper clothing is made of close-fitting garments, especially on the upper limbs.
Nor the operator and the patient must wear rings, necklaces, bracelets, wristwatches, ties or
other objects that could get caught by moving parts of the machinery. In case of allergy, cover
the chair with a sheet.
The operator must stand in order to always control all the adjusted parts and also the patient.
7.2. Use of mattress
In order to ensure hygiene and safety to your patients and ensure long life of the mattress, we recommend
you always cover it with a towel/bed cover and disposable sheets of cartene before starting any treatment.
Both the operator and the patient should not wear rings, necklaces, bracelets, watches or other objects that
may damage the mattress. The upholstery could be damaged by the normal heat of the skin or by a prolon-
ged use of essential oils or cosmetic products.
7.3. Controls
The chairs can be controlled by a foot pedal control, a wireless pedal or a handset control. All controls are
maintained action, that is releasing the control pedal button the motion stops. Except for the "AUT" control,
wich can be stopped by pressing any pedal / button.
The operator can use only the pedal and handset control to move the chair
DOWN
UP
10
PEDAL WITH CABLE (TESERA 1M)
Pedal 1: Chair up
Pedal 2: Chair down