Panasonic AW-HE870E Instructions D'opération page 58

Adjustment
q Colour phase adjustment
Colour phase adjustment is necessary only for the
composite or Y/C signals of the SD format.
Adjust the colour phase of the camera to the basic colour
tone such as programme output signal (split colour bar
output signal) from the colour special effect generator.
Colour bar of camera
Split line
Colour bar of special
effects generator
Adjustment by camera menu
Press the DOWN/BAR switch for over 2 seconds to
display the colour bar.
Press the MENU switch for 3 seconds or more to display
the main menu.
Press the UP/ABB switch or the DOWN/BAR switch to
move the cursor to [G/L Set], then press the ENTER/AWB
switch to display the G/L Set sub menu.
Select [SC Coarse] on the G/L Set sub menu.
Make coarse adjustment with the UP/ABB switch and the
DOWN/BAR switch.
Select [SC Fine] on the sub menu.
Perform fine adjustment with the UP/ABB switch and the
DOWN/BAR switch.
The amount of adjustment for adjusting [SC Fine] can be
selected with [H Phase, SC Fine Step].
- 57 (E) -