Panasonic AW-HE870E Instructions D'opération page 45

How to operate the system
wControl exercised from the Multi Hybrid Control Panel AW-RP555
Each time the GAIN button is pressed, the setting is
switched in the sequence of GAIN AUTO
L (9dB) H (18dB), and the mode is displayed by the
LEDs as shown below.
[ON: LED lit; OFF: LED off]
GAIN button MANU L LED
AUTO ON OFF
0dB OFF OFF
LOW OFF ON
HIGH OFF OFF
Others OFF ON
Each time the MODE button is pressed, the
setting is switched between CAM and BAR.
The MODE button lights up at the BAR setting.
For selecting the cameras and pan-tilt head
systems to be operated.
Shutter mode selection
Each time this button is pressed, one of the shutter modes set by
the controller or "shutter OFF" is selected.
The SHUTTER button lights up in all modes except shutter OFF.
The shutter mode settings established by the PRESET buttons are
as follows.
MODE PRESET No.
1/120 PRESET1
1/250 PRESET2
1/500 PRESET3 SYNCHRO-SCAN
1/1000 PRESET4
1/2000 PRESET5
0dB
MANU H LED
OFF
OFF
OFF
ON
ON
MODE PRESET No.
1/4000 PRESET6 For switching WHITE BAL A,
B or ATW. *5
1/10000 PRESET7
PRESET8
ELC PRESET9
OFF PRESET10
For executing AWB. *1, *2
For executing ABB. *1, *4
- 44 (E) -
For switching the SCENE file
(User/Halogen/Fluorescent/
Outdoor).
Use these buttons to perform the
camera menu operations.
MENU: This operates in the same
way as MENU on the
camera.
ITEM: This operates in the same
way as ENTER on the
camera.
YES: This operates in the same
way as DOWN on the
camera.
NO: This operates in the same
way as UP on the camera.
Flashes when an alarm
(Fan Error) is received
from the camera. *3