The device must be subjected to safety checks and
maintenance by authorized technicians before use and
each re-use, but at least every 24 months.
Please consult your distributor if there are any problems
with device and accessories.
The manual must always be carried with the device.
MALFUNCTIONS
Should any malfunctions occur while using your device, check
the following points. If none of these can solve the problem,
please contact the customer service.
Whether the controls are correctly adjusted. Check whether
the values suggested by the physician have been adjusted.
Check whether the cables are correctly connected to the
device.
The display does not turn on? Check if the device is charged.
Recharge if needed.
Check the cables for possible damage. The device may only
be used when subjected to a load.
There is no stimulation current? Check if the electrodes are
connected to the same channel correctly and if the intensity is
high enough.
CONFORMITY TO SAFETY STANDARDS
The STIM-PRO X9a device is in compliance with the
EN 60601-1-2:2007 and 60601-1:2006 safety standards.
STIM-PRO X9a
EN
49