Axion STIM-PRO X9a Manuel D'utilisation page 45

7. Set Pulse Rate
The pulse rate is adjustable from 1Hz to
150Hz. Press
setting. Then press the
to change the settings. If no instructions
regarding the pulse rate are given in
therapy, set the control to 70 – 120 Hz.
8. Set timer
There are two adjustable timers available.
controls the application duration for the channels CH 1&2
controls the application duration for the channels CH 3&4
The settings are adjustable from 1 to 60 minutes. With the
setting (C) the machine runs in continuous mode. Press
control to enter the settings. Press
just setting. Press the
minutes to set the timer to continuous stimulation. Both timers
can be adjusted in the same way.
(L) Timer CH1 & CH2 (R) Timer CH3 & CH4
9. Adjusting the intensity
The intensity can be adjusted from 0 – 100. Press
control to adjust the setting on the respective channels 1-4.
control to enter this
or control
control when the timer shows 60
STIM-PRO X9a
or control to ad-
Continuous
or
EN
43