Time Setting - Ulysse Nardin Torpilleur Tourbillon 42mm Mode D'emploi

CALIBER UN-128
A Crown screwed down.
B To wind the movement : unscrew and turn
crown clockwise.
C Time setting. When corrections and adjust-
ments are completed, push the crown and
screw down to position A to guarantee full
water-resistance.
4
A B C

TIME SETTING

Unscrew and pull the crown out to position C.
Turn the hands clockwise to the desired time.
Push the crown back to position B, then press slightly to
engage the threads and turn to screw the crown down. The
water-resistance can only be guaranteed when the crown
is correctly screwed down.
POWER RESERVE INDICATOR
The self-winding movement is fully wound when the hand on
the counter at 12 o'clock shows "HAUT". The movement has a
power reserve of approximately 60 hours.
ULYSSE NARDIN CERTIFICATION
Ulysse Nardin's certification does not only certify the move-
ment performance but the timepiece as a whole (after setting
the dial and hands and encasing). Its rigid tests are a testimoni-
al to the skills of Ulysse Nardin's watchmakers and engineers.
PRECISION
Precision and average daily rate depend on the activity of the
person wearing the instrument. Magnetic fields (computers,
mobile phones, etc.) may influence the working of a watch. Vio-
lent shocks or knocks - quite common in tennis or golf − should
be avoided to prevent shaking that may loosen certain parts.
5