Product Description; Parts Supplied; Intended Use; Tool Parts - CAMPAGNOLA Starberry MD 2 Manuel D'utilisation Et D'entretien

3.2

Product description

The electric vibrating hook, named Starberry MD2, and power-supplied by a plug-in battery (13), is a product intended for
harvesting blueberries and other kinds of similar fruit.
The vibrating hook is composed of a body with an ergonomic handle, a gearmotor, an electronic speed controller, a trigger
(5) and a pole (8) with hooks (9) and (10). The body is fitted with an ON/OFF button (22), driving the tool switching-on-and-
off operations, the +/- buttons (3) and (4) to select the speed, which allow to vary the pole (8) vibration frequency, and a red
LED light (2), to check the on-and-off status of the tool.
At each re-start the system keeps the previously set frequency memorized. Moreover, the tool is fitted with a regenerative
braking system, which allows the recovery of energy, limiting its consumption.
Please mind that the tool has been designed and manufactured just for the aims described above.
The tool has been designed and manufactured exclusively for the purposes mentioned above.
3.3

Parts supplied

- Electric vibrating hook
- Carbon pole
- 2 adjustable hooks
- 1 fixed hook
- 3 lithium batteries
- Battery charger
- Quick guide for the tool first use with indications to read/download this use and maintenance manua
- Maintenance tool kit
- Carrying case.
3.4

Intended use

The tool has been designed for cutting and pruning according to the above-described manners and
• Any other use has to be considered improper and potentially dangerous for the operators' safety. This would
make any warranty claims void.
• If it is not used for the purposes it was designed for, the tool may get damaged and cause serious injuries to
personnel and bystanders and damages to things.
3.5

Tool parts

Pos. Description
1
ON/OFF button
2
ON/OFF LED indicator
3
+ button
4
- button
5
Trigger
6
Trigger guard
7
Transmission shaft
8
Fixed pole
9
Adjustable hooks
10
Fixed hook
11
Screws for the hooks
12
Locking nuts
13
Battery
14
Release plates
15
Battery contacts
16
Battery charger
17
Recharge connectors
18
LED indicators
Use and Maintenance Manual – Original
Instructions Rev.: 01, Date 25/01/2022
Function
Switches the tool on and off
Shows whether the tool is on or off
Allows to increase the shaking speed
Allows to decrease the shaking speed
Operates the tool
Prevents from accidental tool activations
Transmits motion from the tool to the hooks assembled on the pole
Connects the hooks to the tool
Allow to shake the branch
Allows to shake the branch
Allow to fix the hooks on the pole
Reduce considerably the unscrewing of the hooks
Makes the tool work
Allow to plug in/disconnect the battery
Connect the battery to the tool
Charges up to 3 batteries in sequence
Allow to connect the battery to its charger
Show the battery charge status
limits.
Pict.
A
A
A
A
A
A
A
A
A
A-C
A-B
B
B
B
B
B
B
D
Pag. 23