Key To Symbols; Brakes; Adjustment Of Clutch Lever; Front Brake - Beta Motorcycles ALP 200 2020 Manuel

3

KEY TO SYMBOLS

Tightening torque

BRAKES

FRONT BRAKE

The front brake is disk type with hydraulic
control.
Use the adjusting nut 1 to vary the inter-
vention point.
WARNING: reduced play causes brake
overheating leading to sudden lockup.
1

REAR BRAKE

The home position of brake pedal can be
altered by turning adjusting screw 1.
Adjust by loosening locknut 2 and adjust-
1
ing screw 1.
Retighten the locknuts 2 after completing
the operation.
2
ADJUSTMENT OF CLUTCH
1
LEVER
To perform the adjustment, lift rubber dust
cover 1 and turn adjuster 2.
The lever must have 5 mm of idle stroke.
2
EN
34