To Enter The Setting Mode - Beta Motorcycles ALP 200 2020 Manuel

2

TO ENTER THE SETTING MODE

Adjust+SelectX3 function instruction
The tire circumference and sensing point setting
EN
In main screen, press down the
Adjust+SelectX3 to enter the tire circum-
ference and sensing point setting (for
changing different size tire.)
The tire circumference and sensor point
setting.
Press the Adjust button to enter the
tire circumference setting.
EX. The tire circumference is 1890 mm.
Press the Select button to change the
setting.
NOTA: The tire circumference setting
range 2400mm / 2100mm.
EX. The tire circumference setting is
changed from 2190 mm to 1890 mm.
Press Adjust button to go back to tire
circumferences value setting screen.
From switch to
Press the Adjust button to enter the clock
(Hour) setting
Press the Select button to enter the clock
(Hour) setting.
26
screen.