Heatsail DISC Manuel D'utilisation page 15

S T E P 6
Using the drill, tap
corresponding holes to those
used for the ceiling mount
bracket (see Step 4) in the ceiling
rose/medallion. Number 1 on the
picture.
NOTE: Use drill size suitable for
the mounting hardware use.
Next, drill one large hole in the
middle of the ceiling rose for the
wiring extending from the ceiling.
Number 2 on the picture.
S T E P 7
Using the four universal screws
or other hardware appropriate
for mounting surface, install the
mounting bracket and ceiling
rose/medallion as shown.
Manual
four
1.
1.
1.
2.
2.
EN
1.
1.
15